Water Damage Restoration in Clive, IA

Trusted Water Damage Restoration Experts Serving Clive

Clive sits at the geographic axis of the metro’s western suburbs — sandwiched between Urbandale, West Des Moines, and Waukee along the I-35/I-80/I-235 corridors, bisected by Walnut Creek, and home to the celebrated Greenbelt Trail system. That location creates a particular water-damage profile: the majority of Clive homes were built between 1985 and 2005 during the city’s first big growth wave, meaning original copper supply lines, polybutylene fittings in early-90s builds, and water heaters now well past their second replacement cycle. Clive is also one of the metro’s most affluent communities — median household income runs over $131,000 and median home values exceed $400,000 — which means higher-end finishes that are expensive to clean and even more expensive to replace when water damage hits. All Dry Services of Des Moines is the locally owned and operated team Clive residents call the moment something gets wet that shouldn’t be.

Our IICRC-certified technicians arrive in 60 minutes or less, day or night, to extract standing water, dry the affected structure, and stop secondary damage before it spreads. We work directly with your insurance carrier, and back every project with a 100% satisfaction guarantee. We serve all of Clive — ZIP code 50325, spanning both Polk and Dallas counties — including Country Club Glen, Huntington Ridge, Wellington Ridge, Walnut Ridge, Westview Bend, Indian Hills, the Hickman Road corridor, and the established neighborhoods along the Greenbelt Trail. Learn more about why Clive homeowners choose All Dry for emergency restoration.

Our Water Damage Restoration Process

Every water loss is different, but the right response follows the IICRC S500 standard — the industry benchmark for professional water mitigation. Here is what happens when you call All Dry Services for water damage restoration in Clive.

1. Emergency Inspection and Damage Assessment

Within an hour of your call, our crew is on-site. We identify the water source, stop it if it’s still active, and use moisture meters and thermal imaging cameras to map every wet pocket — including hidden moisture behind walls, under flooring, and inside cabinets. When the leak isn’t visible, our leak detection team pinpoints it without invasive demolition. We also classify the water by IICRC category (Category 1 clean, Category 2 gray, or Category 3 black water) because the category determines the cleanup protocol.

2. Water Extraction and Removal

We extract standing water with truck-mounted and portable extraction units. A flooded Clive basement after a sump-pump failure or supply-line burst can hold thousands of gallons — particularly in the larger finished walk-out basements common in the Country Club Glen and Wellington Ridge subdivisions. For losses involving rising water from heavy storms overwhelming Walnut Creek’s local drainage rather than a contained leak, this overlaps with full flood damage restoration.

3. Structural Drying and Dehumidification

Extraction alone is not drying. Once standing water is removed, we place commercial-grade air movers and low-grain refrigerant (LGR) dehumidifiers calibrated to your structure’s moisture load. Drying typically runs 3 to 5 days, and we monitor moisture readings daily to confirm the structure is returning to its dry-standard target — not just appearing dry on the surface.

4. Sanitization, Cleaning, and Anti-Microbial Treatment

Once dry, we clean and sanitize every affected surface with EPA-registered anti-microbial solutions. This is non-negotiable for Category 2 and Category 3 losses — including sewage cleanup jobs — and it is the step that prevents mold from establishing itself after the water is gone. Lingering smells from absorbed moisture are addressed with our odor removal services.

5. Repair and Reconstruction Coordination

If drywall, flooring, or cabinetry was damaged beyond drying, we coordinate the rebuild so you have a single point of contact. For Clive’s higher-end housing stock — hardwood floors, custom cabinetry, designer trim — careful matching of finishes matters as much as the technical drying work. We document the entire scope of loss in the format your insurance adjuster needs: photos, moisture logs, and a line-item mitigation report.

Common Causes of Water Damage in Clive Homes

Clive’s housing profile — most homes built 1985 to 2005, with significant 1980s-era construction still dominant — produces a specific set of water-damage triggers. Knowing them helps homeowners spot trouble early.

Aging supply lines in 1980s-era construction: The bulk of Clive’s housing stock was built during the city’s 1980s-2000s growth wave. Original copper supply lines from 30 to 40 years ago develop pinhole leaks. Polybutylene supply lines used in some early-1990s builds are notorious for catastrophic failure without warning, often inside walls. And 1980s-era cast-iron drain stacks are at or past their expected service life. The damage from any of these often runs for weeks behind walls before anyone notices.

Water heater failures: Tank water heaters last 8 to 12 years on average. Many Clive homes are now on their 3rd or 4th replacement cycle — and the inevitable failure of an aging unit releases 40 to 80 gallons across a basement or garage in minutes. Larger 75- or 80-gallon tanks in Country Club Glen and Wellington Ridge luxury builds make this an even more significant loss event.

Sump pump failure: Walnut Creek bisects Clive, and the surrounding water table can rise sharply during spring snowmelt and heavy summer rain. Residential sump pumps run hard during these periods, and a 10-year-old pump that fails during a May or June thunderstorm is one of the most common causes of basement flooding in the city — particularly along the older neighborhoods that border the Greenbelt Trail.

Frozen and burst pipes: Iowa winters routinely drop well below zero. Homes with supply lines running through unheated garages, finished bonus rooms over garages, or exterior walls — common in Clive’s two-story construction — see pipe ruptures during deep cold snaps. The result can be hundreds of gallons released before anyone notices, especially in homes left vacant during winter travel.

Appliance and supply-line leaks: Washing-machine hoses, dishwasher supply lines, refrigerator ice-maker lines, and toilet supply lines fail without warning. A burst hose behind a washer can release water continuously until someone hears it. If the leak source isn’t obvious, our leak detection team can locate it without tearing into walls.

Walnut Creek flooding and storm overload: Walnut Creek runs through the heart of Clive and is the defining drainage feature of the city. Severe summer storms can overwhelm both Walnut Creek’s banks and individual sump systems, and flat terrain on either side of the creek compounds the issue — water has nowhere to run off naturally. Properties near the Greenbelt Trail and along Walnut Creek see floodplain-style risk that’s separate from typical homeowner’s coverage and is covered under flood insurance instead. Severe weather events sometimes also require storm damage restoration alongside water mitigation.

Sewer backups: Heavy storms can overwhelm local capacity and force Category 3 black water back into basements through floor drains. This is always a professional sewage cleanup job — never a DIY.

Foundation seepage: Saturated soil after multiple wet days pushes hydrostatic pressure against basement walls. Clive’s 30- to 40-year-old homes with poured-concrete or block foundations often have small cracks that weep during sustained wet periods, and finished basement spaces over those foundations trap moisture invisibly.