Mold Removal & Remediation in Ankeny, IA

Trusted Mold Remediation Experts Serving Ankeny

Mold is the one household problem you can’t safely solve with a bottle of bleach and a weekend. It grows behind walls, inside HVAC ductwork, and under flooring. It releases spores into the air you breathe. And the wrong approach — scrubbing, spraying, or even just disturbing it without proper containment — sends contamination into rooms that were never affected to begin with. All Dry Services of Des Moines is the locally owned and operated mold removal and remediation team Ankeny residents call when they want it done right the first time.

Our IICRC-certified technicians follow the ANSI/IICRC S520 Standard for Professional Mold Remediation — the industry benchmark. We contain the affected area with negative air pressure, remove contaminated materials, scrub the air with HEPA filtration, treat surfaces with EPA-registered antimicrobials, and correct the moisture source so the mold can’t come back. We serve all of Ankeny — ZIP codes 50021 and 50023 — including Saylorville, Hayes Acres, the Ankeny Industrial Park area, and surrounding Polk County neighborhoods. Learn more about why Ankeny homeowners choose All Dry for restoration and remediation work

Our Mold Remediation Process

Effective mold remediation isn’t just about killing what you can see. It’s about identifying every contaminated material, isolating the work area so spores can’t spread, removing the source of moisture that fed the mold, and confirming with air quality testing that the property is safe to occupy again. Here is what happens when you call All Dry Services for mold remediation in Ankeny.

1. Free Inspection and Moisture Source Identification

Within an hour of your call, our crew is on-site for a free mold inspection. We identify visible growth, locate hidden contamination behind walls and under flooring using moisture meters and thermal imaging, and trace the moisture problem back to its source. Mold is always a moisture problem — a roof leak, plumbing failure, basement seepage, or chronic high humidity. If we don’t find and fix the source, the mold comes back. When the source is a hidden water leak, our leak detection team pinpoints it without invasive demolition.

2. Containment and Air Filtration Setup

Before any mold is touched, we isolate the work area. Plastic sheeting and zipper doors seal off contaminated rooms, and negative air pressure is established with HEPA-filtered air scrubbers so contaminated air can only flow into the work zone — never out. This is the single most important step in protecting the rest of your home from cross-contamination. Skipping it is how DIY mold jobs and unqualified contractors turn a small problem into a whole-house problem.

3. Removal of Contaminated Materials

Porous materials saturated with mold — drywall, insulation, carpet padding, ceiling tiles — generally have to be removed and replaced. They can’t be cleaned. Semi-porous materials like wood framing are HEPA-vacuumed, wire-brushed if needed, and treated with antimicrobial. Non-porous materials like metal, glass, and tile are cleaned in place. Everything that’s removed is bagged inside the containment, double-bagged on the way out, and disposed of according to EPA guidelines.

4. HEPA Cleaning and Antimicrobial Treatment

After contaminated material is gone, every surface in the containment is HEPA-vacuumed and wiped down. We then apply EPA-registered antimicrobial solutions to treat any remaining mold spores and inhibit future growth. Air scrubbers continue running throughout to capture airborne spores released during the work.

5. Moisture Source Correction

Remediation that doesn’t fix the moisture source isn’t remediation — it’s a delay. Once the mold is removed, we address the underlying problem: drying out residual moisture in the structure, recommending repairs to the leak or seepage source, and in many cases coordinating with our water damage restoration team if a recent loss created the conditions in the first place.

6. Post-Remediation Verification

After cleaning is complete, we run a final inspection and offer post-remediation air quality testing through a third-party indoor environmental professional. Independent testing matters — it’s how you know the work was effective, and it’s the documentation that gives you, your insurance carrier, and any future buyer of the property real confidence the problem is solved.

7. Reconstruction and Final Restoration

Once the area passes clearance testing, we rebuild what was removed — drywall, insulation, flooring, trim — so you have a single point of contact from inspection through final walkthrough. The space is returned to you clean, healthy, and finished.

Common Causes of Mold in Ankeny Homes

Mold needs three things to grow: moisture, an organic food source (drywall and wood qualify), and a stable temperature. Iowa homes provide the last two effortlessly. The variable is moisture — and Ankeny’s climate plus typical residential construction produces a predictable list of triggers.

Basement humidity and seepage: Ankeny’s spring snowmelt and summer humidity drive moisture into basements through foundation cracks, around plumbing penetrations, and through poorly sealed window wells. Finished basements with carpeted floors and drywalled walls are especially vulnerable — those materials hold moisture invisibly until the mold is already established.

Unresolved water damage: The single most common cause of indoor mold. A burst pipe, sump-pump failure, dishwasher leak, or sewer backup that wasn’t dried out properly will start growing mold within 24 to 48 hours. If you had a water loss months or years ago and you’ve never quite shaken the musty smell, you almost certainly have mold.

Bathroom and kitchen moisture: Insufficient ventilation in bathrooms and kitchens lets steam and cooking moisture condense on cool walls and ceilings. Bath fans that vent into attics instead of outside, or simply weren’t run during showers, are classic mold incubators.

Roof leaks and ice dams: Iowa winters create ice dams that force water under shingles and into attics. The leak may be small enough that the homeowner never notices it on the ceiling — but mold will colonize the attic insulation, sheathing, and trusses. Severe weather events sometimes also require storm damage restoration alongside mold work.

Sewage backups and Category 3 water: Floor drain backups during heavy rain push Category 3 water into basements. That water carries bacterial and fungal contamination, and even after the water is gone, the residual contamination feeds aggressive mold colonization. These losses always involve professional sewage cleanup first.

HVAC and ductwork condensation: Air conditioners that aren’t draining properly, oversized systems that short-cycle without dehumidifying, and ductwork running through humid crawl spaces all create condensation that grows mold inside the system you’re using to circulate air through your home.

New construction tight envelopes: The newer 2010-2019 Ankeny housing stock is built tight — energy-efficient, sealed against air leaks, and easier to trap moisture inside without proper mechanical ventilation. Mold issues in new builds usually trace back to humidity control, not water damage.